Do the same thing as you did with steps 1-3,
Put the two side-by-side.
Put a ball socket piece here,
Turn the structure, and place a 2x2 yellow brick as shown.
Place a second 2x2 on the other side.
Turn the structure again, and place a 1x2 plate on top.
Then, put another plate next to it.
Put a 1x4 plate onto both smaller plates.
Then put another plate in the middle of the 1x4.
Put 2 black hook pieces on either side of the middle plate.
Then, put 2 1x2 plates on top.
Put a hinge piece in the middle of what's left of the other side.
Put 2 black slanted pieces on either side of the hinge.
Then, put a circular yellow piece on the hinge.
Next, put 2 orange triangles as shown.
Then put a short yellow slanted piece as shown.
Now put another yellow slant on the other side, and an orange triangle on the left yellow slant.
Put an orange triangle on the other side facing right.
Now, start a new structure using a ball/ball socket long piece.
Put a gray triangle on top of the structure.
Then put a gray 1x2 plate UNDER the structure.
Then, put a triangle, and a ball piece on it.
Then put a reverse triangle under the ball piece.
Next, put a 1x2 yellow plate on the reverse triangle.
Put a gray triangle on the orange triangle.
Put a triangle on the triangle on the triangle!!! :D
Then, attach the leg to the body.
Start the second leg with a 1x2 gray plate.
Then, put a long ball/ball socket plate on top.
Then put a gray triangle on top.
Another... triangular piece.... ...yay.
Then, put a yellow reverse triangle under a ball piece attached to the ball socket piece.
Put a yellow 1x2 plate there...
...an orange triangle here,
And, a triangle on a triangle on a triange!!! (again! :D)
Turn the body and put on the second leg as shown.
Put 2... weird-shaped pieces side-by-side on the bottom row of the body.
What's next? More triangles! Put 4 face-down triangles on the weird-shapes.
Well, whad'ya know? More triangles!
Then, put a trapezoid-ish yellow piece on the "more" triangles.
Now, start the arm with an arm thingy.
Then put a yellow hook on a yellow turny-thingy on the arm thingy.
Put a black cover on the hook, and attach an arm thingy on the hook.
Then, put a thing on the... thing... Just look at the pictures!
Put a GOLD triangle on the hookattacherthingamaboobit and attach a hook to the, uh, how do you spell it?
Then put a Volectro-tooth "undercover" and put the cover on the hook.
Same thing as last time, except not the EXACT same pieces!
Attach the left-arm to the body like so.
Start the right-arm (the awesome arm) with an arm-thingy!
put a turn-hinge on the arm-thingy. (I use alot of -)
Put a face-down and a face-right triangle on the turn hinge.
Then, basically build Zaptor's arm (except the triangle is gold), and put a black cover on the hook.
Add a hook holding an electro-piece on Zaptor's arm.
Then, put the right-arm (the awesome arm) on the body...
Aaaaaaand TUUUUUUUUUUUUUUUUUURN! All the way to the back.
Then put a gray reverse hook on the black triangle like so.
...And attach an arm-thingy with two face-right triangles on it.
And turn! (The arm-thingy), And put another hook on the other black slant.
Do the same thing you did last time, so that all 4 triangles are facing the back.
And TURN! (sorry, I just love those words! XD)
Now put 2 yellow hooks on the gray ones.
Then put 2 shuff-head pieces side-by-side on the hooks/1x2 plates.
Now stack 8 translucent blue studs on top of each other, similar to Electroids-MAX's tail.
Except, with THIS max we're going to use a circular yellow plate in the middle of the studs.
Now, put Volectro's wild-hairstyled-hair on top of it.
Now let's look back at the body, without adding anything. (If you do not have extra Krader's spinny pieces, ignore these next few steps)
...and take off the yellow circular piece from the hinge.
Add your extra Krader-spin piece on the hinge. This is just for cool action.
Now put the yellow circular piece back on, so now it turns.
Next, stick the tail in the middle of the yellow circular plate.
Now put a black 2x2 on shuff's head-thingies.
And a ball-socket piece right on it.
Now... for the bottom-jaw, we'll need Shuff's body piece.
And, a gray 1x2 plate to go with it.
And... a black 2x2 plate to go with it!
Now, add teeth on the edge and a light gray ball plate on the black plate.
Then, attach the bottom jaw to the ball socket piece previously added to the body.
Now put 2 more orange triangles next to the ball socket plate.
Move the not-awesome arm out of the way.
Then put a yellow 1x2 plate on the ball socket.
And another ball socket on the yellow plate.
Now, start the top jaw with another Shuff body part.
And a gray 1x2 plate to go with it...
And a black 2x2 plate and teeth to go with that!
Now put a light gray 2x2 ball plate on the black one.
And flip the whole thing!
Now, place 2 Zaptor eye-holders on Shuff's body part.
Also, Volectro's cute little eyes! :)
Finally, add Shuff's head gem and a light gray triangle on top.
Now attach the top jaw to the ball socket.
Put a 1-studded yellow plate on the ball socket, hanging over the 2 orange triangles.
Add a stud on top of a satellite dish on the 1-stud plate.
Put one final satellite dish on the others,
And a light gray triangle on top!
Now KNOCK HIM DOWN!!! (gently!)
And place a dark gray reverse-studded circular piece in the middle for stabilization.